NUREG/CR.

NUREG/CR.
Author: U.S. Nuclear Regulatory Commission
Publisher:
Total Pages: 56
Release: 1981
Genre: Nuclear energy
ISBN:

NUREG/CR.

NUREG/CR.
Author: U.S. Nuclear Regulatory Commission
Publisher:
Total Pages: 164
Release: 1977
Genre: Nuclear energy
ISBN:

Fault Tree Handbook

Fault Tree Handbook
Author: U S Nuclear Regulatory Commission
Publisher: www.Militarybookshop.CompanyUK
Total Pages: 210
Release: 2012-11
Genre: Technology & Engineering
ISBN: 9781782662495

Since 1975, a short course entitled "System Safety and Reliability Analysis" has been presented to over 200 NRC personnel and contractors. The course has been taught jointly by David F. Haasl, Institute of System Sciences, Professor Norman H. Roberts, University of Washington, and 'members of the Probabilistic Analysis Staff, NRC, as part of a risk assessment training program sponsored by the Probabilistic Analysis Staff. This handbook has been developed not only to serve as text for the System Safety and Reliability Course, but also to make available to others a set of otherwise undocumented material on fault tree construction and evaluation. The publication of this handbook is in accordance with the recommendations of the Risk Assessment Review Group Report (NUREG/CR-0400) in which it was stated that the fault/event tree methodology both can and should be used more widely by the NRC. It is hoped that this document will help to codify and systematize the fault tree approach to systems analysis.

NRC Regulatory Guides

NRC Regulatory Guides
Author: U.S. Nuclear Regulatory Commission
Publisher:
Total Pages: 32
Release: 1973
Genre: Nuclear industry
ISBN:

A compilation of currently available electronic versions of NRC regulatory guides.

Eliciting and Analyzing Expert Judgment

Eliciting and Analyzing Expert Judgment
Author: Mary A. Meyer
Publisher: SIAM
Total Pages: 471
Release: 2001-01-01
Genre: Mathematics
ISBN: 0898714745

Expert judgment is invaluable for assessing products, systems, and situations for which measurements or test results are sparse or nonexistent. Eliciting and Analyzing Expert Judgment: A Practical Guide takes the reader step by step through the techniques of eliciting and analyzing expert judgment, with special attention given to helping the reader develop elicitation methods and tools adaptable to a variety of unique situations and work areas. The analysis procedures presented in the book may require a basic understanding of statistics and probabilities, but the authors have provided detailed explanations of the techniques used and have taken special care to define all statistical jargon. Originally published in 1991, this book is designed so that those familiar with the use of expert judgment can quickly find the material appropriate for their advanced background.

Lees' Loss Prevention in the Process Industries

Lees' Loss Prevention in the Process Industries
Author: Frank Lees
Publisher: Butterworth-Heinemann
Total Pages: 3708
Release: 2005-01-10
Genre: Technology & Engineering
ISBN: 0750675551

Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world's chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O'Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field